Commodity-TV

The whole world of commodities in one App!

Watch Management & Expert Interviews, Site-Visit-Videos, News Shows and receive top and up to date Mining Information on your mobile device worldwide!

Download our unique App for free!
Commodity-TV Play Store
Commodity-TV App Store
Commodity-TV

Social Media


Canada Nickel Announces Main Zone Extension and Additional Drilling Results at Crawford Nickel Sulphide Project

Highlights

  • Main Zone drilling extended mineralization to the north and northwest by 1.8 kilometres across true widths of 120 to 320 metres 
  • First higher grade PGM intersections in main dunite mineralization – two holes yielded true width of 3.9 metres of 1.6 g/t PGM and 0.49% nickel, and 6.7 metres of 1.6 g/t PGM and 0.30% nickel
  • PGM zone successfully intersected by an additional 5 holes (20 holes total in Main Zone across 2.4 km strike length). New PGM zone discovered at North Zone
  • Initial North Zone assay results defined nickel mineralization along strike length of 400 metres up to 200 metres wide and 400 metres deep and remains open in all directions
  • East Zone drilling completed across 1.9 kilometres of strike length with 1.1 kilometres untested ultramafic remaining to the east

Receive up-to-date information about the company directly via push notification

TORONTO, June 23, 2021 – Canada Nickel Company Inc. ("Canada Nickel" or “TheCompany") (TSX-V:CNC) (OTCQB: CNIKF - https://www.commodity-tv.com/ondemand/companies/profil/canada-nickel-company-inc/ ) today announced assay results from the latest 34 drill holes from the Crawford area. A further 26 holes have been drilled at Crawford with assays pending.

“Our Preliminary Economic Assessment (“PEA”) is based on a mineral resource cut-off from approximately eight months ago. Since then, we have completed more than double the amount of drilling. Today’s results clearly demonstrate the potential to significantly increase the size and quality of the mineral resource through the success of the infill drilling and the extension of the Main Zone by 1.8 kilometres to the northwest, initial assay results from the North Zone, and successful infill drilling in the East Zone. Today’s results also highlight the PGM potential to be incorporated in the feasibility study, expected in mid-2022, as we develop a path to market which is expected to deliver nickel units into the electric vehicle sector alongside the stainless steel path included in the PEA. This path to market is expected to allow the recovery of PGMs along with cobalt, generating additional revenues from metals already being recovered into concentrate. I look forward to further results from Crawford as we continue to explore the district potential of our Timmins land package,” said Mark Selby, Chair and CEO of Canada Nickel.

The Crawford Nickel Sulphide Project is located in the heart of the prolific Timmins-Cochrane mining camp in Ontario, Canada, and is adjacent to well-established, major infrastructure associated with over 100 years of regional mining activity.

Main Zone – Western Extension

Assays have been received from 10 holes between the existing Main Zone resource and north-westernmost extent of the geophysical anomaly, which have extended the envelope of mineralized dunite by 1.8 km from the northwest boundary of the current resource. Four additional holes from this area were previously reported in the Company’s January 14, 2021 news release and a further eight holes have been drilled and have assays pending. 8 of 10 holes intersected higher grade material (>0.30% nickel) ranging in true widths of 17 to 71 metres. See Figure 1 and Table 1 for results.

Main Zone – Western Extension – Nickel + PGM Intervals

Holes 106A and 109 have yielded the first higher grade PGM intersections in the Main Zone mineralization – true width of 3.9 metres of 1.6 g/t PGM and 0.49% nickel, and 6.7 metres of 1.6 g/t PGM and 0.30% nickel, respectively. This area and another area 800 metres to the north with a similar geophysical footprint will be a focus of future exploration efforts to further delineate this higher grade zone of mineralization. See Table 3c for results.

West Zone Drilling Results – Lower Grade Zone

Nine holes were completed in the lower grade section of the western side of the Crawford structure which continued to return wide, lower grade intersections. Hole 83 returned 0.23% nickel over an entire core length of 441 metres, including 6.0 metres of 0.33% nickel. Hole 80 was also mineralized over the entire core length, returning 0.23% nickel over 453 metres, including 0.37% nickel over 19.5 metres. The first two holes, previously released on January 14, 2021, in this part of the West Zone confirm wide, lower grade mineralization more than 800 metres wide. See Figure 1 and Table 2 for results.

Figure 1 – Main Zone Western Extension and West Zone Results (Total Magnetic Intensity), Crawford Nickel Sulphide Project, Ontario.

Table 1 – Main Zone Western Extension – Drilling Results, Crawford Nickel Sulphide Project, Ontario

DDH ID

From

To

Length

Estimated
True Width

Ni

Fe

Cr

Co

Pd

Pt

S

 

(m)

(m)

(m)

(m)

(%)

(%)

(%)

(%)

(g/t)

(g/t)

(%)

            

CR20-76

48.5

501.0

452.5

281.0

0.25

7.18

0.53

0.014

0.020

0.012

0.06

including

138.0

291.0

153.0

95.0

0.27

7.08

0.51

0.015

0.027

0.015

0.10

including

151.5

186.0

34.5

21.4

0.36

7.18

0.38

0.017

0.043

0.018

0.19

and

268.5

282.0

13.5

8.4

0.39

7.38

0.43

0.016

0.075

0.049

0.10

 

           

CR20-81

73.5

501.0

427.5

274.8

0.25

6.81

0.65

0.012

0.010

0.007

0.03

including

186.0

246.0

60.0

38.6

0.30

6.61

0.55

0.012

0.033

0.015

0.03

and

168.0

186.0

18.0

11.6

0.37

6.10

0.76

0.012

0.025

0.009

0.08

including

178.5

186.0

7.5

4.8

0.40

6.49

0.80

0.012

0.027

0.009

0.08

            

CR20-86

51.5

552.0

500.5

321.7

0.24

7.43

0.59

0.013

0.013

0.014

0.04

including

465.0

552.0

87.0

55.9

0.32

7.41

0.49

0.014

0.027

0.013

0.12

including

471.0

486.0

15.0

9.6

0.48

7.45

0.30

0.015

0.041

0.015

0.27

            

CR21-92

60.3

600.0

539.7

93.7

0.27

6.96

0.64

0.013

0.016

0.009

0.08

including

180.0

388.5

208.5

36.2

0.34

6.60

0.66

0.014

0.032

0.011

0.16

including

370.3

382.5

12.2

2.1

0.37

7.68

0.40

0.015

0.175

0.035

0.01

and

247.5

264.0

16.5

2.9

0.47

6.30

0.79

0.014

0.042

0.016

0.30

 

           

CR21-94

75.0

402.0

327.0

210.2

0.26

6.82

0.63

0.013

0.013

0.010

0.10

including

108.0

219.0

111.0

71.3

0.34

6.39

0.66

0.014

0.028

0.010

0.21

including

114.0

160.5

46.5

29.9

0.37

5.87

0.72

0.015

0.030

0.011

0.27

including

150.0

160.5

10.5

6.7

0.47

6.20

0.75

0.015

0.037

0.013

0.34

            

CR21-102

75.0

432.0

357.0

229.5

0.23

6.33

0.67

0.012

0.003

0.003

0.03

including

81.0

238.5

157.5

101.2

0.26

5.88

0.74

0.012

0.003

0.003

0.03

            

CR21-104

57.0

402.0

345.0

221.8

0.27

7.21

0.56

0.013

0.012

0.007

0.06

including

108.0

159.0

51.0

32.8

0.33

7.05

0.75

0.012

0.018

0.007

0.05

            

CR21-106A

55.5

303.0

247.5

159.1

0.24

7.31

0.55

0.013

0.045

0.025

0.04

including

55.5

118.5

63.0

40.5

0.28

7.21

0.37

0.014

0.133

0.062

0.05

including

55.5

82.5

27.0

17.4

0.32

7.16

0.34

0.015

0.258

0.122

0.06

including

73.5

79.5

6.0

3.9

0.49

7.69

0.45

0.017

1.095

0.519

0.16

            

CR21-109

48.0

393.0

345.0

221.8

0.24

7.52

0.58

0.013

0.048

0.017

0.02

including

57.0

96.0

39.0

25.1

0.28

7.39

0.61

0.013

0.009

0.004

0.02

and

69.0

111.0

42.0

27.0

0.32

7.28

0.46

0.013

0.126

0.024

0.04

including

103.5

109.5

6.0

3.9

0.44

7.33

0.21

0.014

0.564

0.126

0.08

and

109.5

114.0

4.5

2.9

0.29

7.45

0.30

0.013

2.427

0.254

0.02

 

           

CR21-113

87.0

423.0

336.0

216.0

0.23

7.15

0.61

0.013

0.003

0.007

0.05

including

90.0

118.5

28.5

18.3

0.27

7.37

0.51

0.014

0.005

0.013

0.09

 

 

Table 2 – West Zone Lower Grade Nickel – Drilling Results, Crawford Nickel Sulphide Project, Ontario

DDH ID

From

To

Length

Estimated
True Width

Ni

Fe

Cr

Co

Pd

Pt

S

 

(m)

(m)

(m)

(m)

(%)

(%)

(%)

(%)

(g/t)

(g/t)

(%)

            

CR20-70A

46.0

517.0

471.0

300.4

0.20

7.59

0.61

0.014

0.005

0.007

0.01

            

CR20-71

48.0

594.0

546.0

324.9

0.22

7.50

0.64

0.014

0.006

0.011

0.01

            

CR20-78

71.0

591.0

520.0

330.1

0.10

6.94

0.33

0.011

0.023

0.024

0.05

including

71.0

141.0

70.0

44.4

0.17

6.69

0.49

0.013

0.004

0.004

0.02

            

CR20-79

46.1

349.5

303.4

187.7

0.21

7.48

0.61

0.013

0.007

0.013

0.02

 

           

CR20-80

48.0

501.0

453.0

280.1

0.23

7.50

0.58

0.014

0.013

0.011

0.03

including

322.5

342.0

19.5

12.1

0.37

7.68

0.45

0.015

0.055

0.024

0.13

including

331.5

342.0

10.5

6.5

0.47

8.09

0.45

0.016

0.074

0.033

0.21

            

CR20-82

49.0

420.0

371.0

238.5

0.22

7.40

0.64

0.013

0.016

0.014

0.03

including

316.5

351.0

34.5

22.2

0.28

7.44

0.66

0.014

0.092

0.056

0.08

including

337.5

351.0

13.5

8.7

0.31

7.53

0.64

0.014

0.183

0.107

0.11

            

CR20-83

51.0

492.0

441.0

283.5

0.23

7.38

0.64

0.013

0.023

0.015

0.04

including

258.0

277.5

19.5

12.5

0.28

7.68

0.69

0.015

0.029

0.022

0.09

and

486.0

492.0

6.0

3.9

0.33

7.71

0.51

0.016

0.139

0.051

0.11

 

           

CR20-85

45.0

501.0

456.0

293.1

0.21

7.42

0.62

0.013

0.003

0.006

0.03

            

CR20-88

49.0

531.0

482.0

309.8

0.21

7.29

0.60

0.013

0.008

0.008

0.04

including

49.0

55.0

6.0

3.9

0.27

6.88

0.67

0.013

0.267

0.151

0.02

 

PGM Zone

Eight holes were drilled with five of the holes intersecting the PGM zone. These additional results confirm the association of a PGM zone on the boundary of the gravity high structure which has a circumference of approximately 9.7 kilometres and borders the nickel mineralization in the Main and East Zones. Grades and true widths are consistent with previously reported drilling with higher grade intervals of 1.7 to 3.5 g/t of PGMs across true widths of 1.1 to 3.2 metres within wider intervals of 0.9 to 1.2 g/t of PGMs across true widths of 5.8 to 6.4 metres.

Figure 2 – PGM Intervals – Main and East Zones

 

 

Table 3 - PGM Zone – Drilling Results, Crawford Nickel Sulphide Project, Ontario

DDH ID

From

To

Length

Estimated
True Width

Pd+Pt

Pd

Pt

Ni

Fe

Cr

Co

 

(m)

(m)

(m)

(m)

(g/t)

(g/t)

(g/t)

(%)

(%)

(%)

(%)

 

 

 

 

 

 

 

 

 

 

 

 

CR20-66

221.5

231.0

9.5

6.1

1.2

0.6

0.6

0.03

6.00

0.35

0.01

including

225.0

229.5

4.5

2.9

1.7

0.9

0.9

0.02

5.67

0.34

0.01

and

373.0

381.5

8.5

5.5

1.8

0.9

0.9

0.02

5.84

0.35

0.01

including

375.0

380.0

5.0

3.2

2.4

1.2

1.2

0.02

5.85

0.37

0.01

including

377.0

378.5

1.5

1.0

4.1

2.1

2.0

0.02

5.78

0.28

0.01

            

CR20-73

376.5

385.5

9.0

6.4

0.9

0.4

0.5

0.04

6.21

0.36

0.01

including

384.0

385.5

1.5

1.1

1.7

0.8

0.9

0.02

5.59

0.46

0.01

            

CR20-75

268.5

277.5

9.0

5.8

1.2

0.6

0.6

0.02

5.73

0.45

0.01

including

270.0

274.5

4.5

2.9

1.9

1.0

1.0

0.02

6.03

0.52

0.01

            

CR20-78

325.5

336.0

10.5

6.7

1.3

0.6

0.6

0.07

6.67

0.45

0.01

including

325.5

327.0

1.5

1.0

2.6

1.2

1.4

0.17

6.11

0.25

0.02

            

CR20-96

121.5

130.5

9.0

5.8

1.3

0.9

0.3

0.06

7.65

0.51

0.01

 

267.0

270.0

3.0

1.9

3.5

1.7

1.8

0.02

5.14

0.30

0.01

Holes 67, 68 and 101 drilled short of PGM zones and intersected no significant mineralization. 

Table 3b – PGM Intervals – North Zone

DDH ID

From

To

Length

Estimated
True Width

Pd+Pt

Pd

Pt

Ni

Fe

Cr

Co

 

(m)

(m)

(m)

(m)

(g/t)

(g/t)

(g/t)

(%)

(%)

(%)

(%)

 

 

 

 

 

 

 

 

 

 

 

 

CR20-87

580.5

586.5

6.0

3.9

1.3

0.6

0.7

0.05

8.07

0.56

0.01

            

CR20-89

107.0

108.0

1.0

0.6

1.1

0.8

0.3

0.79

11.40

0.38

0.02

            

CR20-91

172.5

183.0

10.5

6.7

1.1

0.6

0.5

0.03

5.80

0.42

0.01


Table 3c Western Extension Nickel+PGM intervals

DDH ID

From

To

Length

Estimated
True Width

Pd+Pt

Pd

Pt

Ni

Fe

Cr

Co

 

(m)

(m)

(m)

(m)

(g/t)

(g/t)

(g/t)

(%)

(%)

(%)

(%)

 

 

 

 

 

 

 

 

 

 

 

 

CR20-106A

73.5

79.5

6.0

3.9

1.6

1.1

0.5

0.49

7.69

0.45

0.02

including

73.5

76.5

3.0

1.9

2.5

1.7

0.8

0.57

7.51

0.57

0.02

            

CR20-109

105.0

115.5

10.5

6.7

1.6

1.4

0.2

0.30

7.3

0.3

0.0

including

111.0

114.0

3.0

1.9

3.5

3.1

0.4

0.30

7.4

0.3

0.0

 

 

 

North Zone

Six holes were drilled into the North Zone, delineating nickel mineralization across a strike length of 400 metres by 200 metres wide by 400 metres deep which remains open along strike and at depth. Similar PGM grades and widths were achieved to the Main Zone and East Zone PGM grades where drill holes intersected the boundary of adjacent gravity high on the south side of the structure. 

Figure 3 – North Zone – Nickel and PGM intervals

 

Table 4 - North Zone – Drilling Results, Crawford Nickel Sulphide Project, Ontario

DDH ID

From

To

Length

Estimated
True Width

Ni

Fe

Cr

Co

Pd

Pt

S

 

(m)

(m)

(m)

(m)

(%)

(%)

(%)

(%)

(g/t)

(g/t)

(%)

            

CR20-84

63.0

501.0

438.0

185.1

0.24

6.00

0.74

0.011

0.003

0.003

0.02

including

64.5

306.0

241.5

102.1

0.26

5.75

0.85

0.012

0.003

0.003

0.01

 

           

CR20-87

80.0

597.5

517.5

332.6

0.22

6.46

0.68

0.012

0.003

0.003

0.03

including

80.0

202.5

122.5

78.7

0.26

6.05

0.83

0.012

0.003

0.003

0.05

            

CR20-89

77.0

123.0

46.0

29.6

0.24

6.77

0.62

0.010

0.040

0.020

0.07

            

CR20-90

60.9

540.0

479.1

308.0

0.25

5.86

0.74

0.011

0.003

0.003

0.03

including

60.9

409.5

348.6

224.1

0.26

5.79

0.77

0.011

0.003

0.003

0.03

            

CR21-93

76.4

333.0

256.6

164.9

0.26

5.98

0.81

0.011

0.003

0.003

0.02

            

CR21-95

100.5

444.0

343.5

220.8

0.22

6.49

0.70

0.012

0.003

0.003

0.02

Including

370.5

444.0

73.5

47.2

0.26

6.31

0.84

0.011

0.003

0.003

0.02

 

 

 

East Zone

Assays for three drill holes have been received which continue to successfully in-fill and upgrade the East Zone outside of the existing resource. Mineralized intervals yielded mineralized dunite over true widths of 191 to 260 metres.

Figure 4 – East Zone – Nickel Intersections

 

 

 

 

 

 

 

 

 

 

 

 

Table 5 - East Zone – Drilling Results, Crawford Nickel Sulphide Project, Ontario

DDH ID

From

To

Length

Estimated
True Width

Ni

Fe

Cr

Co

Pd

Pt

S

 

(m)

(m)

(m)

(m)

(%)

(%)

(%)

(%)

(g/t)

(g/t)

(%)

            

CR21-108

38.5

348.0

309.5

198.9

0.23

5.98

0.59

0.011

0.006

0.004

0.04

including

109.5

288.0

178.5

114.7

0.26

5.42

0.63

0.011

0.007

0.003

0.04

including

244.5

261.0

16.5

10.6

0.32

5.52

0.69

0.012

0.024

0.008

0.07

 

           

CR21-111A

39.5

444.0

404.5

260.0

0.25

6.81

0.63

0.012

0.006

0.006

0.03

 

           

CR21-112

45.0

426.5

381.5

190.8

0.24

6.41

0.61

0.012

0.004

0.004

0.02

including

45.0

258.0

213.0

106.5

0.28

5.66

0.67

0.012

0.003

0.003

0.03

including

45.0

121.5

76.5

38.3

0.30

5.60

0.67

0.012

0.004

0.003

0.05

 

 

 

Next Steps

The Company will continue to focus on upgrading and extending the resource at Crawford in order to deliver an updated mineral resource estimate by early 2022 to be utilized for the feasibility study expected to be completed by mid 2022. The Company will also focus on exploring the district scale potential of its regional property package.

Table 6 – Drill Hole Orientation, Crawford Nickel-Cobalt Sulphide Project, Ontario

DDH ID

Northing

Easting

Azimuth

Dip

Length

 

(mN)

(mE)

(°)

(°)

(m)

CR20-70A

5,409,819

471,419

269.46

-50.38

471.0

CR20-71

5,409,821

471,420

314.18

-53.48

546.0

CR20-76

5,409,731

471,626

93.45

-51.61

452.5

CR20-79

5,409,599

471,558

225.40

-51.77

303.4

CR20-80

5,409,600

471,561

89.50

-51.80

453.0

CR20-81

5,409,248

472,669

225.60

-50.00

427.5

CR20-82

5,409,401

471,557

45.20

-50.00

371.0

CR20-83

5,409,597

471,745

89.90

-50.00

441.0

CR20-84

5,412,166

472,550

180.00

-65.00

438.0

CR20-85

5,409,280

471,929

90.00

-50.00

456.0

CR20-86

5,409,283

471,927

45.00

-50.00

500.5

CR20-87

5,412,166

472,647

180.00

-50.00

517.5

CR20-88

5,409,275

471,928

134.90

-50.00

482.0

CR20-89

5,412,164

472,646

359.90

-50.00

46.0

CR20-90

5,412,256

472,455

179.50

-50.00

479.1

CR21-92

5,409,078

472,756

225.00

-80.00

539.7

CR21-93

5,411,977

472,750

359.90

-50.00

256.6

CR21-94

5,409,078

472,756

225.00

-50.00

327.0

CR21-95

5,411,846

472,854

360.00

-50.00

343.5

CR21-102

5,410,639

472,243

89.80

-50.00

357.0

CR21-104

5,409,843

472,036

270.00

-50.00

345.0

CR21-106A

5,409,656

471,994

270.00

-50.00

247.5

CR21-108

5,409,721

475,304

360.00

-50.00

309.5

CR21-109

5,409,544

472,163

225.00

-50.00

345.0

CR21-111A

5,409,997

473,402

180.00

-50.00

404.5

CR21-112

5,409,892

475,198

180.00

-60.00

381.5

CR21-113

5,409,234

472,570

225.00

-50.00

336.0

 

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Assays, Quality Assurance/Quality Control and Drilling and Assay Procedures

William E. MacRae, MSc, P.Geo., a "qualified person" as defined by NI 43-101, is responsible for the on-going drilling and sampling program, including quality assurance (QA) and quality control (QC). The core is collected from the drill in sealed core trays and transported to the core logging facility. The core is marked and sampled at 1.5 metre lengths and cut with a diamond blade saw. Samples are bagged with QA/QC samples inserted in batches of 35 samples per lot. Samples are transported in secure bags directly from the Canada Nickel core shack to Actlabs Timmins, an ISO/IEC 17025 accredited lab. Analysis for precious metals (gold, platinum and palladium) are completed by Fire Assay while analysis for nickel, cobalt, sulphur and 17 other elements are performed using a peroxide fusion and ICP-OES analysis. Certified standards and blanks are inserted at a rate of one QA/QC sample per 32 core samples making a batch of 35 samples that are submitted for analysis.

Qualified Person and Data Verification

Stephen J. Balch P.Geo. (ON), VP Exploration of Canada Nickel and a "qualified person" as such term is defined by National Instrument 43-101, has verified the data disclosed in this news release, and has otherwise reviewed and approved the technical information in this news release on behalf of Canada Nickel Company Inc.

About Canada Nickel Company

Canada Nickel Company Inc. is advancing the next generation of nickel sulphide projects to deliver nickel and cobalt required to feed the high growth electric vehicle and stainless steel markets. Canada Nickel Company has applied in multiple jurisdictions to trademark the terms NetZero NickelTM, NetZero CobaltTM, NetZero IronTM and is pursuing the development of processes to allow the production of net zero carbon nickel, cobalt, and iron products. Canada Nickel provides investors with leverage to nickel and cobalt in low political risk jurisdictions. Canada Nickel is currently anchored by its 100% owned flagship Crawford Nickel-Cobalt Sulphide Project in the heart of the prolific Timmins-Cochrane mining camp. For more information please visit www.canadanickel.com.

Cautionary Statement Concerning Forward-Looking Statements

This press release contains certain information that may constitute "forward-looking information" under applicable Canadian securities legislation. Forward looking information includes, but is not limited to, drill results relating to the Crawford Nickel Sulphide Project, the potential of the Crawford Nickel Sulphide Project, timing of economic studies and mineral resource estimates, the ability to sell marketable materials, strategic plans, including future exploration and development results, and corporate and technical objectives. Forward-looking information is necessarily based upon a number of assumptions that, while considered reasonable, are subject to known and unknown risks, uncertainties, and other factors which may cause the actual results and future events to differ materially from those expressed or implied by such forward-looking information. Factors that could affect the outcome include, among others: future prices and the supply of metals, the future demand for metals, the results of drilling, inability to raise the money necessary to incur the expenditures required to retain and advance the property, environmental liabilities (known and unknown), general business, economic, competitive, political and social uncertainties, results of exploration programs, risks of the mining industry, delays in obtaining governmental approvals, failure to obtain regulatory or shareholder approvals, and the impact of COVID-19 related disruptions in relation to the Company's business operations including upon its employees, suppliers, facilities and other stakeholders. There can be no assurance that such information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such information. Accordingly, readers should not place undue reliance on forward-looking information. All forward-looking information contained in this press release is given as of the date hereof and is based upon the opinions and estimates of management and information available to management as at the date hereof. Canada Nickel disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, except as required by law.

For further information, please contact:

Mark Selby, Chair and CEO

Phone: 647-256-1954

Email: [email protected]

In Europe:

Swiss Resource Capital AG

Jochen Staiger

[email protected]

www.resource-capital.ch

Always up to date with the newsletter from SRC

Swiss Resource Capital AG will use the information you provide in this form to keep in touch with you and to provide you with updates and marketing information. To receive our news, you still have to give us permission to send you E-Mails below.

You can change your mind at any time by clicking on the Unsubscribe link, which you can find in the footer of every email you receive from us, or by contacting us at [email protected] We will treat your information with care and respect. For more information about our privacy practices, visit our website. By clicking below, you agree that we may process your information in accordance with these Terms.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.

* indicates required
SRC Mining & Special Situations ZertifikatSRC Mining & Special Situations Zertifikat