Commodity-TV

The whole world of commodities in one App!

Watch Management & Expert Interviews, Site-Visit-Videos, News Shows and receive top and up to date Mining Information on your mobile device worldwide!

Download our unique App for free!
Commodity-TV Play Store
Commodity-TV App Store
Commodity-TV

Social Media


Skeena Discovers Additional High Grade Mineralization in Former Eskay Creek Waste Facility Including 13.09 g/t AuEq over 13.68 metres

Receive up-to-date information about the company directly via push notification

Vancouver, BC (May 31, 2021) Skeena Resources Limited (TSX: SKE, OTCQX: SKREF) (“Skeena” or the “Company” - https://www.commodity-tv.com/ondemand/companies/profil/skeena-resources-ltd/ ) is pleased to report final drilling results from the 2021 Albino Waste Facility (“AWF” or “Albino”) investigation at the Eskay Creek Project (“Eskay Creek” or the “Project”) located in the Golden Triangle of British Columbia. This initial examination, totaling 190 m, was completed utilizing an air rotary drill rig from the ice surface of the permitted AWF in March 2021. Analytical results from the last four of eight drill holes are presented in this release. Reference images are presented at the end of this release as well as on the Company’s website.

Eskay Creek AWF 2021 Highlights:

  • 3.97 g/t Au 130 g/t Ag (5.70 g/t AuEq) over 15.20 m (SK-21-845)
  • 8.68 g/t Au 330 g/t Ag (13.09 g/t AuEq) over 13.68 m (SK-21-846)
  • 3.19 g/t Au 115 g/t Ag (4.73 g/t AuEq) over 14.19 m (SK-21-847)
  • 2.62 g/t Au 82 g/t Ag (3.71 g/t AuEq) over 19.76 m (SK-21-848)

Gold Equivalent (AuEq) calculated via the formula: Au (g/t) + [Ag (g/t) / 75]. True widths equate to 100% of reported sample lengths. Grade-capping of individual assays has not been applied to the Au and Ag assays informing the length-weighted AuEq composites. Metallurgical processing recoveries have not been applied to the AuEq calculation and are taken at 100%. Samples below detection limit were nulled to a value of zero.

Historical Waste Facility Continues to Demonstrate Significant Grade and Potential
The remaining four drill holes for the 2021 AWF investigation have all demonstrated substantial grades and true widths, highlighted by SK-21-846 which intersected 8.68 g/t Au, 330 g/t Ag (13.09 g/t AuEq) over 13.68 m, including two very high-grade subintervals of 36.70 g/t Au 1,575 g/t Ag (57.70 g/t AuEq) over 1.52 m and 17.05 g/t Au, 637 g/t Ag (25.54 g/t AuEq) over 1.52 m. This drill hole is a re-drill of SK-21-845 which was abandoned due to technical difficulties. However, SK-21-845 intersected 3.97 g/t Au, 130 g/t Ag (5.70 g/t AuEq) over 15.20 m before being abandoned. All drill holes from the 2021 investigation intersected substantial Au-Ag mineralization over an area measuring 6,223 m2. The total area of the AWF measures 128,900 m2 and areas not yet drilled remain open for expansion. Length weighted composite grades (uncut) for all eight drill holes averages 4.12 g/t Au, 163 g/t Ag (6.30 g/t AuEq) over an average length of 16.70 m.

Albino Waste Facility Discussion
Situated west of the Eskay Creek mine site, the AWF was utilized by former operators as a subaqueous repository for mine waste management and included both mine waste rock as well as mill tailings.

During historical operations, the underground mine development was largely tunneled in the often-mineralized footwall Rhyolite sequences below the mined Contact Mudstone. Although these rocks possessed variable Au-Ag grades, former operators considered the Rhyolite-hosted mineralization uneconomic due to the high cutoff grades required at the time. Hence, this development rock was transferred to the AWF for subaqueous deposition. 
Via the initial drill-based investigation in Q1 2021, the Company has now empirically demonstrated that significant Au-Ag mineralization was in fact deposited at Albino. Only 5% of the entire AWF has been investigated to date. This first phase of drilling was performed on staggered 50 m centers from the frozen ice surface. Analytical results for the eight drill holes indicate excellent downhole as well as hole to hole Au-Ag grade continuity.

Next Steps – 2021 Program Extension
The Company is currently planning an extension to this drilling program which will be completed in the second half of 2021 based on the positive results from the preliminary investigation.

About Skeena
Skeena Resources Limited is a Canadian mining exploration company focused on revitalizing the past-producing Eskay Creek gold-silver mine located in Tahltan Territory in the Golden Triangle of northwest British Columbia, Canada. The Company released a robust Preliminary Economic Assessment in late 2019 and is currently focused on infill and exploration drilling to advance Eskay Creek to full Feasibility by Q1 2022. Additionally, Skeena continues exploration programs at the past-producing Snip gold mine.

On behalf of the Board of Directors of Skeena Resources Limited,

Walter Coles Jr.
President & CEO

Contact Information
Investor Inquiries: [email protected]
Office Phone: +1 604 684 8725
Company Website: www.skeenaresources.com

In Europe:
Swiss Resource Capital AG
Jochen Staiger
[email protected]
www.resource-capital.ch

 

Qualified Persons
Exploration activities at the Eskay Creek Project are administered on site by the Company’s Exploration Managers, Raegan Markel, P.Geo. and John Tyler.  In accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects, Paul Geddes, P.Geo. Vice President Exploration and Resource Development, is the Qualified Person for the Company and has prepared, validated and approved the technical and scientific content of this news release. The Company strictly adheres to CIM Best Practices Guidelines in conducting, documenting, and reporting the exploration activities on its projects.

Quality Assurance – Quality Control
Once received from the drill and processed, all drill core samples are sawn in half, labelled and bagged. The remaining drill core is subsequently securely stored on site. Numbered security tags are applied to lab shipments for chain of custody requirements. The Company inserts quality control (QC) samples at regular intervals in the sample stream, including blanks and reference materials with all sample shipments to monitor laboratory performance. The QAQC program was designed and approved by Lynda Bloom, P.Geo. of Analytical Solutions Ltd., and is overseen by the Company’s Qualified Person, Paul Geddes, P.Geo, Vice President Exploration and Resource Development.

Drill core samples are submitted to ALS Geochemistry’s analytical facility in North Vancouver, British Columbia for preparation and analysis. The ALS facility is accredited to the ISO/IEC 17025 standard for gold assays and all analytical methods include quality control materials at set frequencies with established data acceptance criteria. The entire sample is crushed and 1 kg is pulverized. Analysis for gold is by 50 g fire assay fusion with atomic absorption (AAS) finish with a lower limit of 0.01 ppm and upper limit of 100 ppm. Samples with gold assays greater than 100 ppm are re-analyzed using a 50 g fire assay fusion with gravimetric finish. Analysis for silver is by 50 g fire assay fusion with gravimetric finish with a lower limit of 5ppm and upper limit of 10,000 ppm. Samples with silver assays greater than 10,000 ppm are re-analyzed using a gravimetric silver concentrate method. A selected number of samples are also analyzed using a 48 multi-element geochemical package by a 4-acid digestion, followed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) and Inductively Coupled Plasma Mass Spectroscopy (ICP-MS) and also for mercury using an aqua regia digest with Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) finish. Samples with sulfur reporting greater than 10% from the multi-element analysis are re-analyzed for total sulfur by Leco furnace and infrared spectroscopy.

Cautionary note regarding forward-looking statements
Certain statements made and information contained herein may constitute “forward looking information” and “forward looking statements” within the meaning of applicable Canadian and United States securities legislation. These statements and information are based on facts currently available to the Company and there is no assurance that actual results will meet management’s expectations. Forward-looking statements and information may be identified by such terms as “anticipates”, “believes”, “targets”, “estimates”, “plans”, “expects”, “may”, “will”, “could” or “would”. Forward-looking statements and information contained herein are based on certain factors and assumptions regarding, among other things, the estimation of mineral resources and reserves, the realization of resource and reserve estimates, metal prices, taxation, the estimation, timing and amount of future exploration and development, capital and operating costs, the availability of financing, the receipt of regulatory approvals, environmental risks, title disputes and other matters. While the Company considers its assumptions to be reasonable as of the date hereof, forward-looking statements and information are not guarantees of future performance and readers should not place undue importance on such statements as actual events and results may differ materially from those described herein. The Company does not undertake to update any forward-looking statements or information except as may be required by applicable securities laws.

Neither the Toronto Stock Exchange nor the Investment Industry Regulatory Organization of Canada accepts responsibility for the adequacy or accuracy of this release.

 

Table 1: Eskay Creek Project 2021 Albino Drilling Campaign Length-Weighted Drill Hole Composites:


Hole-ID

From (m)

To (m)

Sample Length (m)

Au (g/t)

Ag (g/t)

AuEq (g/t)

Hg (ppm)

As (ppm)

Sb (ppm)

SK-21-845

2.94

5.98

3.04

2.00

             59

2.78

          14

        136

           245

SK-21-845

5.98

7.50

1.52

2.26

             76

3.27

          12

        157

           262

SK-21-845

7.50

9.02

1.52

2.30

             71

3.24

          11

        206

           270

SK-21-845

9.02

10.54

1.52

2.93

           133

4.70

          19

        231

           462

SK-21-845

10.54

12.06

1.52

2.06

             69

2.98

          11

        177

           245

SK-21-845

12.06

13.58

1.52

9.02

           254

12.41

          46

        626

        1,870

SK-21-845

13.58

15.10

1.52

4.56

             75

5.56

          26

        271

           471

SK-21-845

15.10

16.62

1.52

6.41

           209

9.20

          54

        274

           986

SK-21-845

16.62

18.14

1.52

6.16

           295

10.09

          87

        237

        1,695

Composite

2.94

18.14

15.20

3.97

           130

5.70

          29

        245

           675

SK-21-846

5.96

7.48

1.52

2.00

             42

2.56

          11

        146

           345

SK-21-846

7.48

9.00

1.52

2.22

             55

2.95

          11

        169

           242

SK-21-846

9.00

10.52

1.52

4.93

           202

7.62

          32

        235

           679

SK-21-846

10.52

13.56

3.04

2.52

             84

3.64

          10

        222

           259

SK-21-846

13.56

15.08

1.52

4.60

           130

6.33

          20

        506

           429

SK-21-846

15.08

16.60

1.52

36.70

        1,575

57.70

          94

        652

        2,740

SK-21-846

16.60

18.12

1.52

5.62

           164

7.81

          56

        206

           926

SK-21-846

18.12

19.64

1.52

17.05

           637

25.54

        181

        292

        3,130

Composite

5.96

19.64

13.68

8.68

           330

13.09

          47

        294

        1,001

SK-21-847

2.67

7.23

4.56

1.71

             51

2.39

          16

        367

           337

SK-21-847

7.23

8.75

1.52

3.37

           110

4.84

          38

        344

           646

SK-21-847

8.75

10.27

1.52

5.81

           239

9.00

          79

        379

        1,175

SK-21-847

10.27

11.79

1.52

2.46

             73

3.44

          21

        245

           364

SK-21-847

11.79

13.31

1.52

2.65

             70

3.58

          17

        341

           308

SK-21-847

13.31

14.83

1.52

5.51

           241

8.72

          46

        471

           881

SK-21-847

14.83

16.86

2.03

3.62

           144

5.54

          39

        246

           509

Composite

2.67

16.86

14.19

3.19

           115

4.73

          32

        344

           543

SK-21-848

2.10

5.14

3.04

3.76

             54

4.47

          13

        239

           298

SK-21-848

5.14

6.66

1.52

2.02

             57

2.79

          11

        172

           303

SK-21-848

6.66

8.18

1.52

1.39

             38

1.90

          11

        162

           199

SK-21-848

8.18

9.70

1.52

3.65

             97

4.94

          26

        206

           708

SK-21-848

9.70

11.22

1.52

1.87

             45

2.47

          14

        188

           308

SK-21-848

11.22

12.74

1.52

2.92

           103

4.29

          34

        157

           767

SK-21-848

12.74

14.26

1.52

1.63

             98

2.94

          22

        235

           439

SK-21-848

14.26

15.78

1.52

2.86

           130

4.59

          29

        312

           657

SK-21-848

15.78

17.30

1.52

2.49

             94

3.74

          29

        311

           827

SK-21-848

17.30

18.82

1.52

1.49

             41

2.04

          12

        216

           334

SK-21-848

18.82

20.34

1.52

2.96

             92

4.18

          29

        296

           682

SK-21-848

20.34

21.86

1.52

3.21

           165

5.41

          34

        183

        1,140

Composite

2.10

21.86

19.76

2.62

             82

3.71

          21

        224

           535

Gold Equivalent (AuEq) calculated via the formula: Au (g/t) + [Ag (g/t) / 75]. True widths equate to 100% of reported sample lengths. Grade-capping of individual assays has not been applied to the Au and Ag assays informing the length-weighted AuEq composites. Metallurgical processing recoveries have not been applied to the AuEq calculation and are taken at 100%. Samples below detection limit were nulled to a value of zero.

Table 2: Mine Grid Drill Hole Locations and Orientations:

Hole-ID

Easting (m)

Northing (m)

Elevation (m)

Length (m)

Azimuth (°)

Dip (°)

SK-21-845

6689.0

9531.0

1049.0

18.1

0.0

-90.0

SK-21-846

6688.6

9531.0

1049.8

25.7

0.0

-90.0

SK-21-847

6643.0

9510.5

1049.8

22.4

0.0

-90.0

SK-21-848

6690.9

9586.9

1049.8

21.9

0.0

-90.0

 

Always up to date with the newsletter from SRC

Swiss Resource Capital AG will use the information you provide in this form to keep in touch with you and to provide you with updates and marketing information. To receive our news, you still have to give us permission to send you E-Mails below.

You can change your mind at any time by clicking on the Unsubscribe link, which you can find in the footer of every email you receive from us, or by contacting us at [email protected] We will treat your information with care and respect. For more information about our privacy practices, visit our website. By clicking below, you agree that we may process your information in accordance with these Terms.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.

* indicates required
SRC Mining & Special Situations ZertifikatSRC Mining & Special Situations Zertifikat