Commodity-TV

The whole world of commodities in one App!

Watch Management & Expert Interviews, Site-Visit-Videos, News Shows and receive top and up to date Mining Information on your mobile device worldwide!

Download our unique App for free!
Commodity-TV Play Store
Commodity-TV App Store
Commodity-TV

Social Media


Skeena Intersects 16.64 g/t Au over 5.10 m in 200 Footwall at Snip

Receive up-to-date information about the company directly via push notification

Vancouver, BC (January 9, 2020) Skeena Resources Limited (TSX.V: SKE, OTCQX: SKREF - https://www.commodity-tv.com/play/skeena-resources-exploration-and-development-of-historic-gold-mine-deal-with-barrick/ ) (“Skeena” or the “Company”) is pleased to announce the remaining analytical results from the 2019 Phase I surface exploration drilling program at the 100% owned Snip gold project (“Snip”) located in the Golden Triangle of British Columbia. The 2019 exploration program consisted of 10 surface drill holes totaling 1,934 m which tested the 200 Footwall Corridor (“200 Footwall”). Reference images are presented at the end of this release as well as on the Company’s website.

2019 Phase I Snip Project Drilling Highlights:

  • 16.64 g/t Au over 5.10 m (S19-035)
    • Including: 96.20 g/t Au over 0.50 m
    • And 39.80 g/t Au over 0.85 m
  • 57.90 g/t Au over 0.65 m (S19-041)
  • 57.00 g/t Au over 0.50 m (S19-041)
  • 12.00 g/t Au over 1.35 m (S19-043)

 

Core lengths are reported due to a lack of supporting data to properly calculate true widths. Length weighted composites were constrained by geological and grade considerations. Grade capping of individual assays has not been applied to the Au assays informing the length weighted composites. Samples below detection limit were nulled to a value of zero. 

New Mineralization Intersected in 200 Footwall
Phase I surface drill hole S19-035 has successfully intersected a new zone of high-grade gold mineralization averaging 16.64 g/t Au over 5.10 m including two sub-intervals grading 96.20 g/t Au over 0.50 m and 39.80 g/t Au over 0.85 m in the 200 Footwall. This zone is located 100 m vertically below surface and 370 m east of the recently reported Phase I 200 Footwall discovery intercept which graded 1,131.91 g/t (36.39 oz/t) Au over 1.50 m (S19-044). The area surrounding the new zone is open down-dip and down-plunge.
The outstanding analytical results for drill holes S19-043 and S19-044 have been received. The high-grade intercept in S19-044 occurred at a depth of 249.60 m. Additional results for this drill hole include 12.60 g/t Au over 0.50 m and 7.41 g/t Au over 0.60 m occurring at 242.35 m and 214.80 m respectively.
Phase I drill hole S19-043 was completed prior to the newly discovered mineralization in drill hole
S19-044 and intersected anomalous gold grades associated with sheared veining including 12.00 g/t Au over 1.35 m. Recently completed modelling of the 200 Footwall mineralization indicates that this drill hole did not extend deep enough to adequately test the 200 Footwall and will be deepened during the next phase of drilling at Snip.

 

About Skeena
Skeena Resources Limited is a junior Canadian mining exploration company focused on developing prospective precious and base metal properties in the Golden Triangle of northwest British Columbia, Canada. The Company’s primary activities are the exploration and development of the past-producing Snip mine and the Eskay Creek mine. In addition, the Company has completed a Preliminary Economic Assessment on the GJ copper-gold porphyry project.

On behalf of the Board of Directors of Skeena Resources Limited,



Walter Coles Jr.
President & CEO

 

In Europe:
Swiss Resource Capital AG
Jochen Staiger
[email protected]
www.resource-capital.ch

Qualified Persons
Exploration activities at the Eskay Creek Project are administered on site by the Company’s Exploration Managers, Colin Russell, P.Geo. and Adrian Newton, P.Geo. In accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects, Paul Geddes, P.Geo. Vice President Exploration and Resource Development, is the Qualified Person for the Company and has prepared, validated and approved the technical and scientific content of this news release. The Company strictly adheres to CIM Best Practices Guidelines in conducting, documenting, and reporting its exploration activities on its exploration projects.

Quality Assurance – Quality Control
Once received from the drill and processed, all drill core samples are sawn in half, labelled and bagged. The remaining drill core is subsequently securely stored on site. Numbered security tags are applied to lab shipments for chain of custody requirements. The Company inserts quality control (QC) samples at regular intervals in the sample stream, including blanks and reference materials with all sample shipments to monitor laboratory performance. The QAQC program was designed and approved by Lynda Bloom, P.Geo. of Analytical Solutions Ltd., and is overseen by the Company’s Qualified Person, Paul Geddes, P.Geo, Vice President Exploration and Resource Development.

Drill core samples are submitted to ALS Geochemistry’s analytical facility in North Vancouver, British Columbia for preparation and analysis. The ALS facility is accredited to the ISO/IEC 17025 standard for gold assays and all analytical methods include quality control materials at set frequencies with established data acceptance criteria. The entire sample is crushed and 1kg is pulverized. Analysis for gold is by 50g fire assay fusion with atomic absorption (AAS) finish with a lower limit of 0.01 ppm and upper limit of 100 ppm. Samples with gold assays greater than 100ppm are re-analyzed using a 50g fire assay fusion with gravimetric finish. Analysis for silver is by 50g fire assay fusion with gravimetric finish with a lower limit of 5ppm and upper limit of 10,000ppm. Samples with silver assays greater than 10,000ppm are re-analyzed using a gravimetric silver concentrate method. A selected number of samples are also analyzed using a 48 multi-elemental geochemical package by a 4-acid digestion, followed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) and Inductively Coupled Plasma Mass Spectroscopy (ICP-MS) and also for mercury using an aqua regia digest with Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) finish. Samples with sulfur reporting greater than 10% from the multi-element analysis are re-analyzed for total sulfur by Leco furnace and infrared spectroscopy.

Cautionary note regarding forward-looking statements
Certain statements made and information contained herein may constitute “forward looking information” and “forward looking statements” within the meaning of applicable Canadian and United States securities legislation. These statements and information are based on facts currently available to the Company and there is no assurance that actual results will meet management’s expectations.  Forward-looking statements and information may be identified by such terms as “anticipates”, “believes”, “targets”, “estimates”, “plans”, “expects”, “may”, “will”, “could” or “would”.  Forward-looking statements and information contained herein are based on certain factors and assumptions regarding, among other things, the estimation of mineral resources and reserves, the realization of resource and reserve estimates, metal prices, taxation, the estimation, timing and amount of future exploration and development, capital and operating costs, the availability of financing, the receipt of regulatory approvals, environmental risks, title disputes and other matters.  While the Company considers its assumptions to be reasonable as of the date hereof, forward-looking statements and information are not guarantees of future performance and readers should not place undue importance on such statements as actual events and results may differ materially from those described herein. The Company does not undertake to update any forward-looking statements or information except as may be required by applicable securities laws.

Neither TSX Venture Exchange nor the Investment Industry Regulatory Organization of Canada accepts responsibility for the adequacy or accuracy of this release.

 

 

 

Table 1: Snip Project 2019 Phase I length weighted drill hole gold composites:

 

HOLE-ID

FROM (m)

TO (m)

CORE LENGTH (m)

AU (g/t)

AREA

S19-035

128.65

133.75

5.10

16.64

200

INCLUDING

128.65

129.15

0.50

96.20

200

AND

129.15

130.00

0.85

39.80

200

S19-041

80.00

81.50

1.50

5.89

HW

S19-041

83.85

84.50

0.65

57.90

HW

S19-041

94.10

94.60

0.50

57.00

200

S19-041

106.40

106.90

0.50

6.74

200

S19-042

63.32

67.00

3.68

6.72

HW

INCLUDING

65.50

66.00

0.50

15.95

HW

AND

66.00

66.50

0.50

18.45

HW

S19-042

112.00

112.50

0.50

10.85

200

S19-043

167.65

169.00

1.35

12.00

HW

S19-043

177.60

178.10

0.50

4.42

HW

S19-044

214.80

215.40

0.60

7.41

UPPER

S19-044

216.30

217.15

0.85

4.41

UPPER

S19-044

242.35

242.85

0.50

12.60

LOWER

 

Core lengths are reported due to a lack of supporting data to properly calculate true widths. Length weighted composites were constrained by geological and grade considerations. Grade capping of individual assays has not been applied to the Au assays informing the length weighted composites. Samples below detection limit were nulled to a value of zero. 

Table 2: Mine grid coordinate system Phase I drill hole locations and orientations:

HOLE-ID

EASTING (m)

NORTHING (m)

ELEVATION (m)

LENGTH (m)

AZIMUTH

DIP

S19-035

4517.8

2206.5

454.0

279.0

269.1

-69.9

S19-041

4652.3

2285.5

533.3

177.0

330.0

-50.7

S19-042

4652.0

2285.0

534.4

200.0

321.0

-67.0

S19-043

4217.0

1972.0

272.8

266.0

349.6

-71.6

S19-044

4217.0

1972.0

272.8

257.0

357.9

-48.0

 

Always up to date with the newsletter from SRC

Swiss Resource Capital AG will use the information you provide in this form to keep in touch with you and to provide you with updates and marketing information. To receive our news, you still have to give us permission to send you E-Mails below.

You can change your mind at any time by clicking on the Unsubscribe link, which you can find in the footer of every email you receive from us, or by contacting us at [email protected] We will treat your information with care and respect. For more information about our privacy practices, visit our website. By clicking below, you agree that we may process your information in accordance with these Terms.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.

* indicates required
SRC Mining & Special Situations ZertifikatSRC Mining & Special Situations Zertifikat

Always up to date with the newsletter from SRC

Swiss Resource Capital AG will use the information you provide in this form to keep in touch with you and to provide you with updates and marketing information. To receive our news, you still have to give us permission to send you E-Mails below.

You can change your mind at any time by clicking on the Unsubscribe link, which you can find in the footer of every email you receive from us, or by contacting us at [email protected] We will treat your information with care and respect. For more information about our privacy practices, visit our website. By clicking below, you agree that we may process your information in accordance with these Terms.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.

* indicates required